Table of Contents
Advertisement
EXTERIOR/INTERIOR TRIM
17.Upper Inner Trim
A: REMOVAL
1) Remove front mole (A).
2) Remove front pillar upper trim (B).
3) Detach front seat belt shoulder anchor, then re-
move center pillar upper trim (C).
( A )
( B )
(1) Hook pawl
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to securely hook pawls of inner trim
panel to body flange.
NOTE:
When installing center pillar upper trim and front pil-
lar upper trim, be sure to set front mole as shown in
figure.
( 1 )
( 3 )
( 5 )
(1) Outside
(2) Inside
(3) Weatherstrip
(4) Molding
(5) Body
(6) Trim
UPPER INNER TRIM
( C )
:
( 1 )
EI-00194
( 2 )
( 4 )
( 6 )
EI-00195
EI-38
Advertisement
Table of Contents
