Table of Contents
Advertisement
6) Remove assist grips (A).
( A )
7) Remove upper inner trim. <Ref. to EI-38, RE-
MOVAL, Upper Inner Trim.>
8) Remove rear window mole of both sides (A).
9) Remove screws (B) and clips (C) of rear quarter
lower trim shown in the figure.
10) Remove rear quarter upper trim (D) of both
sides.
11) Remove rear rail trim (E).
: ( 1 )
(1) Hook pawl
ROOF TRIM
12) Remove cover (B) while detaching snap lock
carefully. Put the rear center seat belt tongue (A)
out to the other side of the trim through the hole.
EI-00201
13) Remove clips and then remove roof trim.
B: INSTALLATION
Install in the reverse order of removal.
EI-00207
EI-43
EXTERIOR/INTERIOR TRIM
( B )
( A )
(1) Snap lock
EI-00208
: ( 1 )
EI-00209
Advertisement
Table of Contents
