Electronic Programmer (Main Oven Only) - DeLonghi ESM 495 ST User Operating Instructions Manual

Electronic programmer (Main oven only)

AUTOTIMER
The electronic programmer is a device which groups together the following functions:
– 24 hours clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Program for automatic oven cooking
– Program for semi-automatic oven cooking.
DESCRIPTION OF THE BUTTONS:
Timer
Cooking period
End of cooking time
Manual position and cancellation of programmed cooking
To increase the numbers on the digital display.
To decrease the numbers on the digital display.
DESCRIPTION OF THE ILLUMINATED SYMBOLS:
AUTO - flashing - Programmer in automatic position but not programmed
AUTO - always illuminated - Programmer in automatic position with program inserted.
Automatic cooking taking place
Timer in operation
and AUTO - flashing - Program error.
(The time of day lies between the calculated cooking start and end time).
NOTE: Select a function using the respective button and, in 5 seconds, set the required
time with the
After a power cut the display resets to zero and cancels the set programs.
ELECTRONIC CLOCK
The programmer is equipped with an electronic clock with illuminated numbers which
indicates hours and minutes.
Upon immediate connection of the oven or after a power-cut, three zeros will flash on
the programmer display.
To set the correct time of day it is necessary to push the
button until you have set the correct time.
In another way push simultaneously the
the or button.
NOTE: If the clock is reset it deletes any previously set programs.
/ buttons ("one-hand" operation).
A
U
T
O
button and then the
two buttons and at the same time push
Fig. 9
or
13