Table of Contents
Advertisement
Metering
This sets the metering method for calculating the exposure.
* Center:
Averages the light metered from the entire frame, but gives greater weight to
the subject matter at the center.
* Spot:
A very small portion of the center of the screen is measured to calculate the
correct exposure.
* Average:
The exposure is measured all of the image area.
Capture Md.
This sets the recording method at the time of capturing images
* Single:
* Continuous:
* AEB:
* Album Shot:
* Burst:
* Cont.flash:
* Pre-shot:
* Coupl.shot:
* Burst 30fps
Quick Shot
If this function is set to "On", the camera takes a quick shot without focusing.
* On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Preview
This sets whether or not to display the captured image on the screen immediately after
the image is captured.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Setup
Refer to the section in this manual titled "Setup Menu" for further details.
EN-28
Captures one image at a time.
Permits continuous capture of up to 3 images.
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
Creates an album-like layout to combine 3 shots into a single image.
Permits continuous photography while pressing and holding the
shutter button. As long as you hold the shutter button pressed,
images are captured until the memory capacity is exhausted.
Permits continuous capture of up to 3 images with flash.
Lets you capture the background first, then have someone to capture
you in front of it.
Uses separate areas to combine two shots. You can include yourself
in the shot.
Permits continuous capture of up to 30 images in the resolution 640
x480 within 1 second.
.
Advertisement
Table of Contents
