Protecting Images - BenQ W1240 User Manual

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.
1. Press the 7 button.
The last image appears on the screen.
2. Select the image that you want to protect with the
buttons.
3. Press the
MENU
4. Select [Protect] with the
button.
SET
5. Select [Single] or [All] with the
press button.
SET
6. Select [Set] with the
button.
SET
Protection is applied to the image and the camera
returns to the playback mode.
The protect icon [ ] is displayed with protected
images.
When [All] has been selected, [ ] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Press the 7 button.
The last image appears on the screen.
2. Select the image that you want to cancel protection with the
3. Press the
MENU
4. Select [Protect] with the
5. Select [Single] or [All] with the
6. Select [Cancel Protect] with the
The removal of image protection is executed and the camera returns to the
playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
button.
/ buttons, and press the
/ buttons, and press the
button.
/ buttons, and press the
/
/
/
/ buttons, and
SET
buttons, and press the
buttons, and press the
MENU SET
MENU SET
/ buttons.
button.
button.
SET
button.
SET
EN-25