General Settings - Psm; Basic Procedure - JVC KD-LH810 Instructions Manual

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM menu (see page 5).
2
Select a PSM item.
Ex.: When "Dimmer" is selected
Indications
Demo/Link
Display
demonstration
Pict
Pictures
KeyIn CFM
Key-in confirmation
Opening*
1
Opening screen
Ending* 1
Ending screen
28
Selectable settings, [reference page]
Demo:
[Initial]; Display demonstration (animation) and
playback source indication appears alternately.
Image Link: To show a still image while playing back an
MP3/WMA track, [13, 46].
Off:
Cancels.
• These graphics appear if no operation is done for about 20 seconds.
You can activate the graphic screen using either movie or picture, [27].
Picture: [Initial]; One of your edited still images stored in
"Picture" is activated.
Movie:
Your edited animation stored in "Movie" is activated.
Slideshow: Your edited still images stored in "Slide" are activated
and shown in sequence.
On: [Initial]; An animation screen appears when you turn on or off the
power and select an i-EQ.
Off: Cancels.
Default: [Initial]; Factory-preset animation is used, [24].
User:
Your own user animation is used.
3
Adjust the setting.
4
2
Repeat steps and
other PSM items if necessary.
5
Finish the procedure.
3
to adjust the