StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks,...
Introduction Thank you for purchasing a StarTech.com USB 2.0 to IDE or SATA Adapter Cable. Now, you will be able to copy, backup, or transfer large amounts of data from one drive to another, while taking advantage of USB2SATAIDE’s convenient Plug and Play design.
Installation WARNING: • Do not disconnect any cables or power sources while the connected hard drive(s) is/are active. This can result in data loss and possible damage to the hard drive. To avoid this, please follow the steps outlined in the section entitled Removing Connected Drives. •...
Page 7
SATA Drive 1. Insert one connector provided by a SATA data cable, into the SATA port on the Hard Drive Adapter. 2. Insert the remaining connector provided by the SATA data cable, into the SATA data port on the SATA hard drive. 40/44-pin IDE Drive 1.
Page 8
Connect the Drive(s) to the Power Adapter WARNING: • When connecting the hard drive to the Power Adapter, please ensure that the mini- switches (located on the main power switch) are set to the OFF position, prior to establishing a connection. Failure to do so could result in damage to the drive, or an electrical shock to the user.
2. Following this, you will be notified that it is safe to remove the USB Mass Storage device: If you do not wish to use the Safely Remove Hardware Wizard: 1. Power down the host computer. Once the computer has been turned off, it is safe to remove the connected drive(s): Move the mini-switch on the power adapter that corresponds with the drive you wish to remove to the OFF position.
Specifications Host Interface USB 2.0 1 x 15 pin SATA Power female 1 x 4 pin Power (LP4) Female 1 x 40 pin IDE Female External Connectors 1 x 44 pin IDE Female 1 x 7 pin SATA Data male 1 x USB type A male 1 x USB Link LEDs...
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 12
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.
Need help?
Do you have a question about the USB2SATAIDE and is the answer not in the manual?
Questions and answers