Submenu Saving - DURKOPP ADLER 540 - 100 Operating Instructions Manual

T3.5.2.4 Free contours

4.4.3.3 Submenu Saving

No. Parameter name
T3.5.3.1 Machine data
T3.5.3.2 All buttonhole data
T3.5.3.3 Individual buttonholes
T3.5.3.4 Free contours
The 16 program locations for free contours of
the dongle are displayed.
- Select the free contour to be loaded with the
cursor keys ñ and ò. When selected
the buttonhole number can be given on the
machine (51 or 52). Press the key
- P in order to copy the selected buttonhole
program to the machine.
Confirmation:
"Yes" - the free contour is copied
"No" - back to the submenu Loading
Description
After a confirmation all machine data are saved.
- All global parameters
- All buttonhole data
- All sequences
- Free contours (the free contours 51 and 52
are automatically saved in the first two
memory locations for free contours!
Free contours saved in the memory locations
1 and 2 are overwritten!
Selection of the further 14 free contours
via menu item "Free contours" T3.5.3.4)
After a confirmation the following is saved:
- All buttonhole data
- All sequences
Free contours are not saved!
The 50 buttonhole program locations of the
machine are displayed.
- With the cursor keys ñ and ò the
buttonhole program to be saved is selected.
The designation of the buttonhole program is
composed of upper bartack-cutting
length-lower bartack (e.g. B26.0C for upper
bartack = B round tack, cutting length
= 26 mm, lower bartack = C taper bar). The
bartack shape is shown in the display. When
selected the buttonhole number 1 to 50 can
be entered on the dongle. Press key
- P in order to copy the selected buttonhole
program to the dongle.
Confirmation:
"Yes" - the buttonhole program is saved
"No" - back to the submenu Saving
The buttonhole programs 51 and 52 of the
machine are displayed.
- Select the free contour to be saved with the
cursor keys ñ and ò. When selected
the memory locations 1 to 16 on the dongle
can be allocated to free contours. Press key
- P in order to copy the selected buttonhole
program to the machine.
Confirmation:
"Yes" - the free contour is saved
"No" - back to the submenu Saving
3
17