Display And Panel; External Connectors - Rodgers Infinity organ Owner's Manual

Display and Panel

1
2
1. Display
Various information is shown here.
2. [Select/Menu] Knob
Turn: When you're in a menu screen for making detailed settings, turn
this knob to select the item you want to operate.
Press: Takes you to a sub-menu, or selects a setting.
3. [Value/Exit Menu] Knob
Turn: Adjusts a setting.
Press: Returns you to the previous menu, or cancels an operation.
ѥ ѥ
To prevent malfunction and equipment failure, always turn down
the volume, and turn off all <remove> units before making any
connections.
ѥ ѥ
Carefully insert the USB flash drive all the way in until it is firmly in
place.
ѥ ѥ
This unit is equipped with a protection circuit. After turning on the
unit, a brief interval (a few seconds) is required before the unit will
operate normally.
ѥ ѥ
Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal and
does not indicate a malfunction.
ѥ ѥ
If you need to turn off the power completely, first turn off the unit, then
unplug the power cord from the power outlet. Refer to "Power Supply"
(p. 5).

External Connectors

1. OUTPUT L/MONO, R (Output) Jacks
3
You can connect an external amplified speaker system here so that the
sound of the organ is played from the connected speakers.
2. INPUT L/MONO, R (Input) Jacks
You can connect an external sound module or similar device here so
that its sounds are heard from the organ's speakers.
3. MIDI IN, OUT Connectors
You can connect external MIDI devices here to exchange performance
data with the organ.
1 2 3
Quick Tour
13