Table of Contents
Advertisement
troUBlESHootIng
ProBlEm
Blades don't turn when
processing.
Unable to lock lid
into place.
gear box in lid jumps out
of lid when processing.
masher leg won't attach
onto masher drive.
Blades won't remove
from potato masher.
grating disc slows down
when grating.
Processing bowl does not
sit flat onto storage base.
motor sounds like
it is not coping with
processing load.
22
SolUtIon
•
May be too much food in bowl; reduce quantity.
•
Pieces of food, such as meat are too large, reduce size.
•
Spindle may be out of position. Remove lid, straighten
spindle as vertical as possible and reposition lid.
•
Food may be stuck underneath the 4 blade processor
preventing the lid from being locked into place. Food
such as nuts can be loaded through the feed chute.
•
Replace gear box and ensure that the control grip is
held vertically and firmly.
•
Ensure mashing leg and gear box arrow graphics are
vertically aligned. Twist masher leg anti-clockwise to
lock for use.
•
Potato masher should still be assembled to the gear box
assembly and to the unplugged motor body.
Rotated clockwise.
•
Grating has exceeded Max level. Empty bowl and
continue to grate.
•
Too much force is being used when grating. Reduce
force when pushing.
•
Ensure adjustable slicing disc is set to Storage Position.
•
Speed may not be correct. Refer to processing guide for
correct speeds.
Advertisement
Table of Contents
