Shifter Fork And Rod Removal; Shifter Fork And Rod Installation; Shifter Fork And Rod Disassembly; Reverse Shifter Fork - Subaru Impreza 2002 Service Manual

MANUAL TRANSMISSION AND DIFFERENTIAL
25.Shifter Fork and Rod
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-44,
REMOVAL, Oil Pipe.>, <Ref. to 6MT-47, REMOV-
AL, Neutral Position Switch.>, <Ref. to 6MT-45,
REMOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
60, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-62,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-64, RE-
MOVAL, Oil Pump.>
8) Remove the transmission case. <Ref. to 6MT-
68, REMOVAL, Transmission Case.>
9) Remove each gear assembly. <Ref. to 6MT-73,
REMOVAL, Main Shaft Assembly.>
B: INSTALLATION
1) Install each gear assembly at once. <Ref. to
6MT-74, INSTALLATION, Main Shaft Assembly.>
2) Install the transmission case. <Ref. to 6MT-69,
INSTALLATION, Transmission Case.>
3) Install the oil pump. <Ref. to 6MT-65, INSTAL-
LATION, Oil Pump.>
4) Install the center differential. <Ref. to 6MT-62,
INSTALLATION, Center Differential.>
5) Install the transfer driven gear. <Ref. to 6MT-60,
INSTALLATION, Transfer Driven Gear.>
6) Install the extension case. <Ref. to 6MT-49, IN-
STALLATION, Extension Case.>
7) Install the oil pipe, neutral position switch, back-
up light switch and harness. <Ref. to 6MT-44, IN-
STALLATION, Oil Pipe.>, <Ref. to 6MT-47, IN-
STALLATION, Neutral Position Switch.>, <Ref. to
6MT-45, INSTALLATION, Back-up Light Switch.>
8) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-39, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
NOTE:
Discard the removed spring pin and replace with a
new one.

1. REVERSE SHIFTER FORK

1) Using the ST, remove the reverse fork.
SHIFTER FORK AND ROD
ST 398791700
2) Using the ST, remove the reverse shifter arm.
ST 398791700
2. 1ST-2ND, 3RD-4TH SHIFTER FORK
1) Using the ST, remove the 3rd-4th shifter fork.
ST 398791700
2) Using the ST, remove the 3rd-4th shifter arm.
ST 398791700
6MT-118
REMOVER
TR0835
REMOVER
TR0836
REMOVER
TR0837
REMOVER
TR0838