Table of Contents
Advertisement
9. Place iPod touch into bezel. Align power
button on iPod with Power Button on bezel.
(See Figure 6)
10. Place back plate over iPod and secure with
4 screws. The retainer has a foam pad to
hold the iPod touch very securly.
(See Figure 7)
11. Place the connector board into the iPod
touch and secure to retainer with 2 screws.
Connect RJ-45 Cable to connector.
(See Figure 8).
KP-iOS
Figure 6: Insert iPod into Bezel
Figure 7: Attach Retainer
Figure 8: Attach Connector Board
7
Advertisement
Table of Contents
