Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Mirage KP-iOS
- Page 1 In-Wall Control Mount for iPod Touch...
-
Page 2: Required Tools
INTRODUCTION The Mirage KP-iOS is an in-wall system that ® allows iPod touch (4th generation) to become a semi-permanent fixture in your wall. The system allows you to use an iPod touch as a key panel to control your Mirage Audio System via the Mirage App and wireless communication. -
Page 3: Selecting An Installation Location
* Do not use the KP-iOS outside or in a humid or wet environment. It is not waterproof or water-resistant. * The KP-iOS cut-out must have enough depth within the wall cavity for the KP-iOS and its connections. -
Page 4: Installation Preparation
Pin 4: Unused Pin 8: +12v 3. Plug the Cat5 cable into the RJ-45 jack on the KP-iOS and the other end into one of the keypad ports on a Mirage M-400 or M-800 amplifier, as shown in Figure 3. KP-iOS... - Page 5 POWER WIRELESS INTERNET ETHERNET PORT M-800 MIRAGE 8 ROOM DIGITAL AMPLIFIER Keypad Ports Figure 3: KP-iOS System Connection KP-iOS...
- Page 6 Disassemble by removing the four screws. Discard the foam block and card insert. 6. Insert the KP-iOS mounting frame into the opening in the wall. Note: The Roto-Lock system can accommo- date wall thickness of 3/8” to 3/4” and can be extended to 1 1/4”...
- Page 7 (See Figure 7) Figure 7: Attach Retainer 11. Place the connector board into the iPod touch and secure to retainer with 2 screws. Connect RJ-45 Cable to connector. (See Figure 8). Figure 8: Attach Connector Board KP-iOS...
- Page 8 Note: To sync your iPod touch with your computer, please follow the steps above in reverse order to remove the iPod touch and sync. Once your synchronization is complete, reinstall the iPod touch and follow the steps to reassemble. Figure 9: Attaching Assembly KP-iOS...
-
Page 9: Operation
Use the iPod touch screen to choose: home screen, applications, music, email. A power on/off button is located on the edge of the KP-iOS bezel as noted in figure 10. Note: For questions regarding the touchscreen functions of your iPod touch, please visit: www.apple.com... -
Page 10: Specifications
Power..............5V 1A DC, regulated Dimensions (W x H x D)........4.027” x 5.969” x 2.4” (102.29mm x 151.61mm x 60.9mm) Cut-out Dimensions (W x H)........ 3.42” x 5 .34” (86.87mm x 135.64mm) 102.29mm 4.027in KP-iOS... - Page 11 AUTONOMIC’s express warranty. Your Product Model and Description: MIRAGE KP-iOS Warranty Period for this Product: One (1) year from the date on the original sales receipt, invoice or other satisfactory proof of purchase.
- Page 12 914 598 1647 | www.Autonomic-Controls.com ©2012 Autonomic Controls and Dana Innovations. All rights reserved. Autonomic, iPort, and Roto-Lock are registered trademarks of Autonomic and Dana Innovations. iPod is a trademark of Apple Inc. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.