Advertisement
Pre-warm cup, see "E) Using Hot Water"
COFFEE
READY. Place a cup under the Dual Coffee Spouts
and push one of the four coffee buttons. Display shows e.g.
1 ESPRESSO
and coffee flows into your cup and stops
automatically.
ENJOY
then
COFFEE
READY.
During brewing you can override the strength and the cup
size by turning the Rotary Dial (behind the door on the left
side). NOTE: Cup size for 2-cup buttons is shown PER CUP!
Important: You can always stop the flow of coffee by
pushing any of the coffee buttons.
A LA CARTE button see Instruction Book, page 17.
D) Changing the Grinder Fineness
Important: You can only adjust the fineness during the
actual grinding process.
1. Open the bean container lid and turn the dial while grinding:
larger dots: coarser; smaller dots: finer.
2. For darker, oily beans, grind somewhat coarser. For lighter
beans, grind somewhat finer.
E) Using Hot Water. Place a cup
underneath the Hot Water Spout
and turn the Selector Dial until
display shows WATER. Push the
Selector Dial, water begins flowing,
push again to stop the water flow.
Selector Dial with Push-Button
Hot Water
Portion
Hot Water
Cappuccino
Latte Macchiato
button
button
frothXpress System
_
Coffee
+
spout
DIAL
+
_
Milk / Steam
spout
F) One Touch Cappuccino. The S9 OT features the Auto
Cappuccino System with two spouts located behind each
other. The front spout produces steam (steam nozzle). The
rear spout produces high pressure brewed coffee. Attached
to the steam nozzle is the removable frothXpress system.
It siphons, steams and froths milk.
1. Fill the thermal milk container with milk and attach to the
frothXpress system. Important: Make sure all parts are
connected tightly, otherwise siphoning does not work.
2. Set the frothXpress dial to the 12 o'clock position for
frothing for cappuccino or to the 6 o'clock position for
steaming for latte.
3. Place a cup underneath the Cappuccino System.
4. Push the Cappuccino button. The S9 OT starts grinding,
the display shows CAPPUCCINO, then coffee strength
(bean graphic). It siphons, heats and froths milk for 14
seconds and adds 2 oz. of high-pressure brewed coffee.
Display shows
5. For hotter milk in either position move the frothXpress dial
towards the (+) plus symbols.
NOTE: For preparing Café Mocha, Latte Macchiato, Hot Milk
and Hot Chocolate see Instruction Book (page 19).
G) Cappuccino Rinsing:
After preparing a beverage with milk, the S9 OT shows
COFFEE READY / RINSE CAPPUCCINO
button illuminates. It takes a few seconds and makes sure
that your frothXpress is free of any milk.
• Turn frothXpress dial to the 3 o'clock position and place a
cup underneath the cappuccino system.
• Push Rinse button
Dual
Hot
Coffee
Water
through the frothXpress and stops.
Spouts
Spout
• Turn the frothXpress dial back to your preferred position.
H) Factory Settings, Beverage Buttons:
Milk Portion
• All coffee buttons are set to temperature HIGH.
• The hot water temperature is set to XHIGH.
• 1-CUP Espresso button – 2 oz./ STRONG.
Milk
• 2-CUP Espresso button – 2 oz. per cup / XSTRONG.
• 1-CUP Coffee button – 5 oz./ STRONG.
• 2-CUP Coffee button – 5 oz. per cup / XSTRONG.
• A La Carte button – 7 oz.
• Cappuccino; one-touch button – 14 seconds milk,
0 seconds pause, 2 oz. coffee / NORMAL.
• Latte Macchiato; one-touch button – 14 seconds milk,
15 seconds pause, 2 oz. coffee / STRONG.
• Milk portion; Selector Dial – 14 seconds milk,
Frothing range
• Water Portion; Selector Dial – 5 oz.; XHIGH.
All other settings see chapter 5, Operating Instructions.
Steam only
no siphoning
I) Re-Programming, Beverage Buttons:
Steaming
Example: Re-program the Cappuccino button to:
range
4.0 oz. of coffee, extra strong, milk production for
20 seconds, temperature stays as is (HIGH).
COFFEE READY
1. Open Front Cover and push and hold the Rotary Dial
until the display shows MAINTENANCE.
2. Turn Dial to
SELECT
ENJOY
then
COFFEE
READY.
and the Rinse
CAPPU.
RINSING. Hot water flows
COFFEE
READY.
PRODUCTS
and push Dial. Display shows
PRODUCT.
3. Push Cappuccino button. Display shows
COFFEE 2.0
OZ.
4. Push the Dial,
COFFEE 2.0 OZ
and turn until
display shows
COFFEE 4.0
OZ.
5. Push Dial to confirm:
CONFIRMED
COFFEE 4.0
OZ.
6. Turn the Dial until display shows
AROMA
current strength setting of three beans.
7. Push the Dial,
NORMAL
and turn until display
shows
XSTRONG
with five beans.
8. Push Dial
CONFIRMED
then XSTRONG.
9. Turn the Dial until display shows
MILK 14 SEC
10. Push dial,
MILK 14
SEC, and turn until display
shows
MILK 20
SEC.
11. Push Dial:
CONFIRMED
then
MILK 20
12. Turn Dial until the display shows
EXIT
SELECT
PRODUCT.
13. If you do not want to change another button, turn
Dial until the display shows
EXIT
and push.
COFFEE
READY.
For more programming options see Instruction Book,
pages 24 through 29.
J) Installing the Clearyl Cartridge
• Rinse cartridge under running water. Snap the
extension rod onto the top of cartridge. Insert into
Water Tank reception, make sure tapered end fits
snugly inside the fins. Close cartridge holder.
• Fill tank with cold water and replace.
Activating the Clearyl Cartridge:
You must activate the cartridge for the machine to
monitor it properly. Otherwise the S9 OT assumes
decalcifying mode.
COFFEE
READY.
1. Push Rotary Dial. Display shows MAINTENANCE.
2.Turn Dial until display shows
FILTER
to enter the program.
3.Turn Dial until
FILTER YES
and push to confirm.
CONFIRMED
then
INSERT FILTER/PRESS
STEAM. The Rinse button illuminates.
4.Place a 20 oz. container under the frothXpress and
turn the frothXpress dial to the 3 o'clock position.
5.Push the Rinse button.
FILTER
RINSING. For the
next 60 seconds the machine will push water
through the cartridge and the frothXpress system.
Initially, the water may have a slight discoloration. The
program stops automatically.
COFFEE
6. Turn frothXpress dial back to your preferred setting.
Please note: As long as the filter is activated, the
water hardness setting is automatically turned off.
then
and the
SEC.
and push.
NO. Push Dial
READY.
Advertisement
