Connecting Audio Equipment With 2-Channel Audio Input Terminals; Connecting Audio Equipment With Digital Audio Input Terminals - Panasonic DVD-RV80 Operating Instructions Manual

ª

Connecting audio equipment with 2-channel audio input terminals

C
You can enjoy stereo sound if you connect an amplifier or system component that has 2-channel audio input terminals.
AUX IN
L
R
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER SURROUND
L
OPTICAL COAXIAL
R
SUB–
SURROUND
WOOFER
Back of the player
ª

Connecting audio equipment with digital audio input terminals

D
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER SURROUND
L
OPTICAL COAXIAL
R
SUB–
SURROUND
WOOFER
Back of the player
OR
OPTICAL COAXIAL
When you have finished connection
Make changes to "7 Digital Audio Output" as shown (
PCM Down Conversion
Dolby Digital
DTS Digital Surround
Audio cable
L/
AUDIO OUT VIDEO
FRONT L
OUT
L
S VIDEO OUT
R/
R
FRONT R
L/
AUDIO OUT VIDEO
FRONT L
OUT
L
S VIDEO OUT
R/
R
FRONT R
page 36).
Yes
§
PCM
[DVD-RV80] PCM
[DVD-RV60] Off
Amplifier and speakers or system component
≥Read the instructions for the amplifier and speakers or
system component for connection details.
Dolby Pro Logic amplifiers
≥If you connect a Dolby Pro Logic amplifier, you will
also need to connect center and surround speakers to
enjoy surround sound. Read the instructions for the
equipment for connection details.
≥Turn V.S.S. off ( page 22). Dolby Pro Logic will not
function correctly if V.S.S. is on.
When you have finished connection
≥Go to "7 Digital Audio Output" and set "1 PCM Down Conversion" to
"No" ( page 36).
≥In "8 Speaker Setting", select "2 2-channel" (
Note when connecting the optical digital audio cable
Dust protection cap
≥Remove the dust protection cap from the optical digital audio
output terminal and connect the cable firmly so that the configu-
rations of both the cable and the terminal match.
≥Keep the dust protection cap and reattach when not using the
terminal.
Optical digital audio cable
≥Do not bend the optical digital audio cable when connecting it.
Coaxial audio cable
System component or amplifier with digital audio input
terminals and speakers
≥Read the instructions for the amplifier and speakers or system
component for connection details.
§If this is set to "No", no audio will be output when DVDs recorded in
96 kHz linear PCM are played. (Audio will be output as it is if the
DVD does not have copyright protection recorded on it.)
≥These changes to digital audio output must be made,
otherwise signals the equipment cannot handle, bitstream, will
be output. If the signals are output as bitstream, "noise" will be
output which can cause harm to your ears and speakers.
page 38).
Align the plug with
the terminal
35
VQT8621