Display - Pioneer DVR-54HX-S Operating Instructions And Owner's Manual

03 Controls and displays

Display

1
8
1
Lights during playback; blinks when
playback is paused.
2
Lights when copying.
ì
3
Lights during recording; blinks when
recording is paused.
4 (page 55)
Lights when a timer recording has been
set. (Indicator blinks if the timer has
been set to DVD but there isn't a
recordable disc loaded, or the timer has
been set to record to the HDD but the
HDD is not recordable.
NTSC
Lights when the video output signal
format is NTSC.
(page 142)
Indicates which channels of a bilingual
broadcast are recorded.
(page 141)
Lights when the component video output
is set to progressive scan (except in
some cases when a component is
connected using HDMI).
VPS / PDC (page 55)
Lights when receiving a VPS/PDC
broadcast during a VPS/PDC-enabled
timer recording.
Note
30
1 DVR-940HX-S: If the timer is set to record to the external HDD, but the external HDD is not recordable, the timer
indicator does not blink to warn of this.
En
2 3
7
1
)
6
5 Recording quality indicators (page 72)
XP
Lights when the recording mode is set to
XP (best quality).
SP
Lights when the recording mode is set to
SP (standard play).
LP / SLP
Lights when the recording mode is set to
LP (long play) or SLP (super-long play).
EP / SEP
Lights when the recording mode is set to
EP (extended play) or SEP (super-
extended play).
MN
Lights when the recording mode is set to
MN (manual recording level) mode.
6 Character display
7 R / RW
Lights when a recordable DVD-R or DVD-RW
disc is loaded.
8 PL (page 98)
Lights when a VR mode disc is loaded
and the recorder is in Play List mode.
2 3 (page 149)
Shows the remote control mode (if
nothing is displayed, the remote control
mode is 1).
V
Lights when an unfinalized Video mode
disc is loaded.
4 5
L R P