After Each Use; Maintaining The Solid Plates; Installation; Positioning - IAG ICS6SE3 Manual

After each use
 Wipe the appliance over with a damp cloth and a little washing up liquid.
 Dry the appliance by rubbing the surface with a clean cloth.
 If the hob top is heavily soiled then if the hob surface is made from stainless steel, then a suitable
stainless steel cleaner should be used.
 IMPORTANT: If a stainless steel cleaner is not used regularly, then it is possible for the surface of
the hob to change colour over a period of time.
 For other hob surfaces, a cleaner such as "Hob Brite" or "Bar Keepers Friend" may be appropriate.
Maintaining the solid plates
 If something is spilt onto the plate itself, then it can be removed using a soft brush, plastic or
nylon scourer and warm water.
 To keep the solid plates in good condition, you should put a little olive oil onto a kitchen towel and
rub it onto the surface of the plate. The next time the plate is used, then it may produce a little
smoke.
 Alternatively you can use a hotplate conditioner; these products can normally be found at larger
supermarkets and hardware stores. The manufacturer's instructions should be followed when
using these products.
 IMPORTANT: If the solid plates are not maintained regularly with olive oil or a hotplate
conditioner, then they may rust.

INSTALLATION

Positioning
The adjacent furniture must be able to withstand a minimum temperature rise of
85°C above the ambient temperature of the room it is located in, during periods of
use.
7 0 0 mm
ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual
6 0 0 ' mm
4 0 0 mm
Without a cooker hood
6 0 0 ' mm
7 0 0 mm
4 0 0 mm
With a cooker hood
- 8 -
Cooker
hood