@MAXX
R
PRIME
EFERENCE
5.4.
Firmware
5.4.1. CCID transport protocol
@MAXX prime and @MAXX prime A implements a transport protocol that is compliant with
USB Device Class: Smart Card CCID Specification for Integrated Circuit(s) Cards Interface
Devices Revision 1.10 for the contact smart card interface and CCID-like transport protocol for
the contactless interface.
This paragraph describes the CCID specification features that are implemented and those that
are not implemented.
5.4.1.1.
•
Abort
5.4.1.2.
The following section provides information on the list of CCID bulk messages (10-byte header
followed by the message specific data) that have been implemented.
List of CCID bulk messages supported
PC_to_RDR_IccPowerOn
•
PC_to_RDR_IccPowerOff
•
PC_to_RDR_GetSlotStatus
•
PC_to_RDR_XfrBlock
•
PC_to_RDR_GetParameters
•
PC_to_RDR_SetParameters
•
PC_to_RDR_Escape
•
PC_to_RDR_Abort
•
PC_to_RDR_SetDataRateAndClockFreqeuncy
•
PC_to_RDR_T0APDU
•
PC_to_RDR_ResetParameters
•
PC_to_RDR_IccClock
•
List of CCID bulk messages not supported
PC_to_RDR_Secure
•
PC_to_RDR_Mechanical
•
5.4.1.3.
Extensive error codes are reported on many conditions during all CCID responses. Most of the
error messages are reported by the CCID appropriately. Some of the main error codes for the
contact interface are:
•
HW_ERROR
•
XFR_PARITY_ERROR
•
BAD_ATR_TS
•
BAD_ATR_TCK
•
ICC_MUTE
M
ANUAL
CCID class requests supported
CCID bulk messages supported
CCID Error Codes
24
Need help?
Do you have a question about the @MAXX prime and is the answer not in the manual?