Rear Compartment - Mercedes-Benz C-Class Operator's Manual

C-class
Hide thumbs Also See for C-Class:
Table of Contents

Advertisement

Features
270
tools to clean the power socket. Keep the
cover of the 115 V AC power socket closed
when not in use. Otherwise, you could suffer
an electric shock and be seriously or even
fatally injured.
G
WARNING
Any device that you connect must have a
suitable plug and meet U.S. standards. Never
pull at a cable to disconnect a plug from a
115 V AC power socket. Never use a damaged
connection cable. The 115 V AC power socket
must never be connected to another 115 V
AC power source. Do not use a converter with
an earthed plug for the 115 V AC power
socket. This could cause serious injury to you
and/or other people.
G
WARNING
If the 115 V AC power socket is damaged or
pulled out of the trim, do not use or touch the
115 V AC power socket. The use of a 115 V
AC power socket that has been damaged or
pulled out of the trim could cause serious
injury to you or others.
115 V power socket : provides an
alternating voltage of 115 V so that small
electronic devices can be connected. These
devices, such as games consoles, chargers
and laptops, should not consume more than
a maximum of 150 W altogether.
Requirements for operation of these devices:
the plug of the electronic device is plugged
R
into 115 V power socket :.
the maximum wattage of the device to be
R
connected must not exceed 150 W.
the on-board power supply is within a
R
permissible voltage range.
the 12 V sockets in the rear compartment
R
are operational (
Open flap =.
X
Switch on the ignition.
X
Insert the plug of the electronic device into
X
115 V power socket :.
Indicator lamp ; lights up.
If indicator lamp ; does not light up, read
more in the section on malfunctions.
To turn off: disconnect the plug from
X
115 V power socket :.
Ensure that you do not pull on the cord.
Possible causes of malfunctions:
the on-board power supply is not within a
R
permissible voltage range.
the temperature of the DC/AC converter is
R
temporarily too high.
some small electronic devices have a
R
constant nominal power of less than
150 W, but a very high switch-on current.
These devices will not work. If you connect
such a device, 115 V power socket : will
not supply it with power.
If indicator lamp ; still does not light up,
contact a qualified specialist workshop.
mbrace
Important safety notes
! A license agreement must exist in order
to activate the mbrace service. Ensure that
your system is activated and ready for use,
and press the ï MB Info call button to
register. If any of the steps mentioned is
I n f o r ma t i o n P r o v i d e d b y :
page 269).
Y

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents