Control 4 Onyx User Manual page 13

To Bypass Security Zone:
In some cases, a particular zone may need to be bypassed so that the system can be armed. To do this, use the
Security icon to view the security keypad.
1. Locate zone number you wish to bypass. See next page for security zone list.
2. Enter your four digit security code.
3. Press 6.
4. Enter the two digit zone number. For example, if zone 6, enter 06.
*
5. Press to enable bypass.
To Omit Bypassed Zone:
1. Press four digit security code.
2. Press Off.