Control 4 Onyx User Manual page 12

Bypass: see Bypass Security Zone below.
!
Code: see Change Security Passcode below.
!
To toggle chime, put in your security passcode and then press 9.
!
Fire, Police, Ambulance call the appropriate dispatcher immediately. Fire and Ambulance will sound your
alarm system. Police will not sound your alarm.
!
If a power outage occurs, the Reconnect button re-establishes the connection between your security system
and Control4.
!
The Ready button allows you to view the faults in your security system.
!
How to clear a Trouble signal:
1. Enter your 4 digit security code.
2. Press "Off" twice.
Tip! Security window will display the last action sensed through the security system.
To Change Security Passcode:
From the Control4 Home screen, select Security > Security System.
1. Press 8324.
2. Press 8.
3. Press 03.
4. Enter new code.
Tip! If you enter a wrong number, press
*
twice to clear and start over.