Locating A File Or Particular Portion On An Mp3 Disc - JVC GET0075-001A Instructions Manual

To change the display information
While playing back an MP3 file, you
can change the file information
shown on the display.
Each time you press DISP (D), the
display changes to show the
following:
• When "TAG DISP" is set to "TAG ON"
(initial setting: see page 36)
Album name/performer (directory name*)
Track title (file name*)
Elapsed playing time (with track No.)
* If an MP3 file does not have ID3 tags,
directory name and file name appear.
• When "TAG DISP" is set to "TAG OFF"
Directory name
Elapsed playing time
(with track No.)
Note:
The display shows up to 8 characters at one time and
scrolls if there are more than 8 characters.
See also "To select the scroll mode – SCROLL" on
page 35.
To stop play and eject the disc
Press 0.
Playback stops, the control panel moves down,
and the disc automatically ejects from the loading
slot.
26
File name
Locating a file or particular
portion on an MP3 disc
To fast-forward or reverse the file
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
To skip to the next or previous files
Press and hold ¢
while playing an MP3
disc, to fast-forward the
file.
Press and hold 4
while playing an MP3
disc, to reverse the file.
Press ¢
briefly while
playing, to skip ahead to
the beginning of the next
file. Each time you press
the button consecutively,
the beginning of the next
files is located and played
back. (See "MP3 playback/
search order" on page 24.)
Press 4
briefly,
while playing, to skip
back to the beginning of
the current file. Each
time you press the
button consecutively,
the beginning of the
previous files is located
and played back. (See
"MP3 playback/search
order" on page 24.)