Performance Checks - Quickie Rumba Directions For Use Manual

17.0 Performance checks:

After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning
correctly before it is used.
• Visually inspect the wheelchair to make sure the
legrests, armrests etc are correctly positioned and
attached to the wheelchair and all fasteners are
sufficiently tightened.
• Make sure that the backrest is correctly fitted and
adjusted.
• Make sure that all of the cushions are in place.
• Switch on the hand control – Do the lights flash? This
signifies that there is a fault in the electronic system.
Refer to section 9.0 for basic troubleshooting.
• Perform the parking brake check.
• Operate all of the electric options, including lights
and indicators (if fitted) to make sure that they work
correctly.
• Drive the wheelchair in each of the drive profiles, (if
installed), to make sure the wheelchair performs as it
did before.
Maintenance and Inspection Schedule
Check battery level indicator and charge if necessary.
Check the joystick of the hand control is not bent or damaged.
Ensure all removable parts are securely fastened.
Check lapstrap for wear and make sure the buckle is operational.
Parking brake test.
Check tyres and inflate.
Ensure the fasteners on the seat depth adjustment are tight, (Rumba
Modular).
Ensure all cables and connectors are sound and are tidy and out of the way.
Clean wheelchair and upholstery.
Battery terminal inspection – Remove any corrosion and apply Vaseline.
Check upholstery, seating, headrests, armpads and calfpads for wear.
Complete inspection, safety check and service should be made by a
Sunrise Medical authorised dealer.
Ref: P19093
WARNING!
If you are in any doubt about the performance requirements
of your wheelchair contact your Sunrise Medical authorised
dealer.
43
Quickie Rumba