Cleaning The Windows And Wiper Blades; Cleaning The Interior - Ford Escape 2013 Owner's Manual

Hide thumbs Also See for Ford Escape 2013:
Table of Contents

Advertisement

Available languages

Available languages

Never wash or rinse any ignition coil,
spark plug wire or spark plug well, or
the area in and around these locations.
Cover the battery, power distribution
box, and air filter assembly to prevent
water damage when cleaning the
engine.
CLEANING THE WINDOWS AND
WIPER BLADES
The windows and wiper blades should be
cleaned regularly. If the wipers do not wipe
properly, substances on the vehicle's glass
or the wiper blades may cause squeaking
or chatter noise from the blades, and
streaking and smearing of the windshield.
To clean these items, follow these tips:
The windows may be cleaned with a
non-abrasive cleaner such as
Motorcraft® Ultra-Clear Spray Glass
Cleaner.
The wiper blades can be cleaned with
isopropyl (rubbing) alcohol or
Motorcraft® Premium Windshield
Washer Concentrate in the U.S., or
Premium Quality Windshield Washer
Fluid in Canada. Be sure to replace
wiper blades when they appear worn
or do not function properly.
Do not use abrasives, as they may
cause scratches
Do not use fuel, kerosene, or paint
thinner to clean any parts.
Vehicle Care
If you cannot remove those streaks after
cleaning with the glass cleaner or if the
wipers chatter and move in a jerky motion,
clean the outer surface of the windshield
and the wiper blades using a sponge or
soft cloth with a neutral detergent or
mild-abrasive cleaning solution. After
cleaning, rinse the windshield and wiper
blades with clean water. The windshield
is clean if beads do not form when you
rinse the windshield with water.
Note: Do not use sharp objects, such as a
razor blade, to clean the inside of the rear
window or to remove decals, as it may cause
damage to the rear window defroster s
heated grid lines.

CLEANING THE INTERIOR

belt webbing.
detergents. Such products could
contaminate the side airbag system and
affect performance of the side airbag in a
collision.
For fabric, carpets, cloth seats, safety belts
and seats equipped with side airbags:
Remove dust and loose dirt with a
vacuum cleaner.
Remove light stains and soil with
Motorcraft® Professional Strength
Carpet & Upholstery Cleaner.
238
WARNINGS
Do not use cleaning solvents, bleach
or dye on the vehicle's safety belts,
as these actions may weaken the
On vehicles equipped with
seat-mounted airbags, do not use
chemical solvents or strong

Advertisement

Chapters

Table of Contents
loading

Table of Contents