Storing Stations In Memory - JVC CDA-5755 Instructions Manual

3
Tune in to a station you want while "M"
is flashing.
Press
in to stations of higher
frequencies.
Press 4
in to stations of lower
frequencies.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM) until you release
the button.
When an FM stereo broadcast is hard to
receive:
MODE
1
Press MODE to enter the functions
mode while listening to an FM
stereo broadcast.
2
Press MO (monaural), while still in
8 MO
the functions mode, so that the MO
indicator lights up on the display.
Each time you press the button,
the MO indicator lights up and
goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.

Storing stations in memory

You can use one of the following two methods to
¢ to tune
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
• Manual preset of both FM and AM stations
to tune
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
1
2
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
station Sequential Memory)
Select the FM band (FM1 – 3) you want
to store FM stations into.
FM1
Press and hold both buttons for more
than 2 seconds.
"SSM" appears, then disappears when automatic
preset is over.
FM2 FM3
AM
7