External Component Operations; Playing An External Component - JVC CDA-5755 Instructions Manual

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See "Selecting the external component to
use—EXT IN" on page 17.)
1
Select the external component
(LINE IN).
• If "LINE IN"* does not appear on the display, see
page 17 and select the external input ("LINE IN").
* Displayed only when one of the following sources is
selected — FM, AM and Tape.
Note on One-Touch Operation:
When you press CD-CH, the power automatically
comes on. You do not have to press
on the power.
22
7 8 MO 9 10 11 RPT
2
3
4
to turn
12 RND
MODE SCM
Turn on the connected component
and start playing the source.
Adjust the volume.
Adjust the sound as you want.
(See pages 12 – 14.)