Finding The Beginning Of A Tune; Other Convenient Tape Functions - JVC CDA-5755 Instructions Manual

Finding the beginning of a tune

Multi Music Scan allows you to automatically start
playback from the beginning of a specified tune.
You can specify up to 9 tunes ahead of or before
the current tune.
During playback
Specify how many tunes ahead of or
before the current tune the one you want
is located.
Press
ahead of the current tune on
the cassette.
Press 4
before the current tune on the
cassette.
Each time you press the buttons, the number
changes up to ±9.
When the beginning of the specified tune is
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, the Multi Music Scan
function may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions between
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming between
tunes.
– Tapes with tunes recorded at low recording levels.
10
¢ to locate a tune
to locate a tune

Other convenient tape functions

Skipping the blank portions on the tape
You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
1
Press and hold SEL (select) for more
than 2 seconds.
"CLOCK H", "CLOCK M", "LEVEL", "B. SKIP"
or "EXT IN*" appears on the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
2
¢ or 4
Press
"B. SKIP (blank skip)."
CLOCK H
EXT IN
B. SKIP
3
Press + to select "ON."
Now Blank Skip is activated.
4
Finish the setting.
To cancel Blank Skip, repeat the same procedure
and select "OFF" in step 3 by pressing –.
to select
CLOCK M
LEVEL