T/P Switch; Time Break Recall Switch; Wall Mounting - Geemarc CLEARSOUND PhotoPHONE User Manual

Table of Contents

Available languages

Setting up

3 - TONE/PULSE SWITCH (T/P)

The Tone/Pulse switch is factory pre-set to Tone

position (T). In UK, all telephone exchanges now

use Tone dialling. If your phone does not dial out,

it is probably being used from an older private

switch- board (PBX). In this case, theTone/Pulse

switch must be moved to Pulse.

4 - TIME BREAK RECALL (TBR) SWITCH

For UK, the TBR switch should be set to 100 mS.

It can be switched to 300 mS for other locations or

PBX's.

Note: If you are using your CL1100

with a hearing aid, set your hearing

aid to "T" position.

To wall-mount your telephone, slide out the clip,

turn and slide back into the wall mounting position

Table of Contents