Specifications - JVC TS-C421SPGU Installation Manual

Connecting the speaker cord
Attach to the speakers
When you connect the supplied speaker cord to the terminal clamp of the speakers, fold the end of each speaker
cord to avoid short-circuit.
1. Fold the end of each speaker
cord.
• Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals (ª and ·) degrades stereo
feeling and sound qualities.
Attach to the display
1. Press and hold the terminal
clamp.
• Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals (ª and ·) degrades stereo
feeling and sound qualities.
Bundling the speaker cords
You can bundle the speaker cords neatly with the supplied cord clamp, as illustrated.
• Stick the cord clamp after removing its protective seal. Give an amount of time before
bundling the speaker cords, or the cord clamp may be detached.
• If you are sticking the cord clamp to the back of the display, be careful not to block the
ventilation hole.

Specifications

• Power Handling Capacity : 3 W
• Impedance
• Speaker
• Dimensions
(W x H x D)
(Mass)
2. Press and hold the terminal
clamp.
: 6 Ω
: 9.5 cm x 1 cm
Direct Drive Speaker, two
: 43 mm x 640 mm x 43 mm
: 0.7 kg (for each excluding the speaker bracket)
3. Insert the speaker cord, and
release the finger from the
terminal clamp.
2. Insert the speaker cord, and
release the finger from the
terminal clamp.
Speaker cord
Cord clamp
5