General Maintenance Instructions; Replacement Parts - CARTER-HOFFMANN PHB450 Operator's Manual

WARNING
Never move cart unless
all doors are securely
closed. Serious damage
to hinges and doors may result if
bumped into walls, tables, or other
equipment when the doors are open.
WARNING
Use only (OEM) original
equipment
replacement parts. Using
unauthorized parts may cause serious
injury. Replacement parts should be
installed by a qualified technician.
Part Numbers
Model Refrigeration
(electrical specs) Assembly
PHB450 16002-6135
115-100v, 60/50 Hz
PHB480 16002-2119
115-100v, 60/50 Hz
PHB480 16002-2122
208-230v, 60/50 Hz
PHB650 16002-2123
115-100v, 60/50 Hz
PHB975 16002-2126
115-100v, 60/50 Hz
PHF825 & PHF900 16002-2113
115v, 60 Hz
Condensate Evaporator
18614-0095

GENERAL MAINTENANCE INSTRUCTIONS

DOORS
Never tip cart forward or open doors to drain water during or after washing.
This can cause serious damage to the hinges, doors and latches.
CASTERS
Some casters are equipped with Zerk grease fittings so that they may be
easily lubricated with a grease gun. Recommended lubrication is at least
once every six months. Lubrication will be required more frequently if carts
are cleaned with a hot water or steam cleaning system. Casters with special
bearings are recommended for frequent cart wash or steam cleaning situa-
tions.
HINGES
Your cart doors and hinges have been factory aligned with nylon spacers to
assure positive latching and smooth action. Be sure to replace these wash-
ers if the are removed when cleaning doors and hinges. If doors are re-
moved for cleaning, we recommend that they be put back on the same cart
to assure the best possible alignment and operation.
LATCHES
Check frequently to insure that all door latches are secure. Latches may
become "sticky" due to residue build-up from daily use and cleaning. Lubri-
cate latches regularly with WD-40, silicone spray, graphite or other commer-
cial lubricants for stainless steel products. Do not use oil.
PERIMETER BUMPERS
Vinyl which has been dislodged from the channel due to severe bumping or
scraping can be pried back into place with a common screwdriver.

REPLACEMENT PARTS

Contact factory with your model and serial number for replacement
components.
manufacturer
Factory Recommended Charge of Refrigerant:
PHB450, PHB480, PHB650, PHB975: 1 Lb., 6 Oz. R134A
PHF900, PHF825, PRF850, PRF950: 1 Lb., 6 Oz., R404
Condensing Accumulator Filter Dryer
Unit
18612-5030 18614-0050 18614-0062
18612-5030 18614-0050 18614-0062
18612-5031 18614-0050 18614-0062
18612-5030 18614-0050 18614-0062
18612-5030 18614-0050 18614-0062
18613-9047 18614-0050 18614-0062
Defrost Control Fan Motor Fan Bracket
18614-0011 18613-0138 18613-0140
Expansion Blower Coil Thermostat
Valve
18614-0085 18614-0237 18600-0080
18614-0085 18614-0237 18600-0080
18614-0085 18614-0238 18600-0080
18614-0085 18614-0237 18600-0080
18614-0085 18614-0237 18600-0080
18614-0089 18614-0240 18600-0080
Fan Blade Speed Nut Condenser
18613-0141 18613-0142 18613-0143
7
Light Switch Power Cord
18601-0070 18602-0030 18605-0020
18601-0070 18602-0030 18605-0020
18601-0080 18602-0029 18605-0015
18061-0070 18602-0030 18605-0020
18601-0070 18602-0030 18605-0020
18601-0070 18602-0030 18605-0020
Shroud Shroud Clip
18613-0144 18613-0145