BMW Z4 Installation Instructions Manual page 8

8
35. Maneuver CD Changer into place, then insert
bushings (1) into slots in left bracket
assembly.
36. Insert and tighten 2 M5x14 bolts (2) provided
in parts kit through Right Hand bracket into
clip nuts.
37. Test CD Changer for functionality.
38. Install bracket cage (1) using 4 M5 clip nuts
(2) and 4 M5x14 bolts (3) provided in parts
kit.
39. Install lamp module (1) removed from ABS
storage unit (see step 29) into new small
oddments box (2). Thread Manual Override
Cable to its lower guide location.
40. Insert original 2 T20 screws (3) into upper
bin assembly. Insert plastic pocket (4) (carpet
side down) into unused navigation location.
41. Insert original 2 T20 screws (1) and plugs (2)
into lower bin assembly. Connect lamp
terminal (3) to lamp module.
Note: Lower lamp terminal will no longer be
used.
42. Thread manual override cable (4) through
guiding loop.
43. CD Changer installation is complete.
Reinstall all parts removed in reverse order of
installation.