Table of Contents
Advertisement
Group
Group allows you to record a specific selection of lights for quick recall during
programming. After selecting lights in the Fixture Grid, enter RECORD. Touch the
Group icon, then select a record location. Name the Group, if desired. Touch the Done
icon to record, or the Cancel icon to start again.
Play – Memory, Left/Right Playback and Mixed
PLAY provides a choice of methods for recalling recorded looks, while providing
information about the current and upcoming Memories and Cues. There are four
playback views: MEMORY, LEFT PLAYBACK, RIGHT PLAYBACK and MIXED. The
choice of one playback method does not disable the other methods – faders will still
recall stored Memories even when Left or Right Playback is the selected.
Memory
Across the top of the screen, faders containing Memories are indicated by a label and a
level indicator. Select the desired Memory Page from the tool bar. Then use the correct
fader to recall the desired Memory. Each Memory Page may hold up to 400 Memories.
Use the navigation arrows to access other fader banks.
When a Memory location is selected, the location's outline will turn red and the
Memory's playback timings and bump button configuration are shown in the information
area below the faders. To change timings, press the Edit button. Once in Edit, you may
also rearrange the order of the Memories by drag-and-dropping the Memory to a new
location.
To delete a Memory, press the Edit button. Touch the delete icon at the top of the
Memory rectangle. A second delete icon will appear. Touch the second icon to confirm
you want the Memory deleted, or the Cancel icon to back out.
Left/Right Playback
To assign a Playlist to a Playback, simply touch the one desired from the tool bar. In Left
Playback, all cues comprising the Playlist will appear on the left side of the screen. A
green arrow next to the cue name indicates the next cue to be run. Timings for the
currently selected cue (the one outlined in red) will appear on the right side. In Right
Playback, the positions are reversed.
Once a Playlist is assigned to a Playback, further Playlists may be selected for that
Playback without releasing the original Playlist, allowing more than two Playlists to be
active at one time. To release a Playlist, press and hold the Shift button then press the
Pause/Back button above the appropriate Playback fader.
19
Advertisement
Table of Contents
