Table of Contents
Advertisement
Memory Page, touch the Add New icon. To rename or delete a Memory Page, press the
Edit button to the right of the touchscreen. To delete, touch the Delete icon. A second
Delete icon will appear. Touch the second Delete icon to confirm. To rename the
Memory Page, touch the Memory Page's current name. An Edit Properties screen will
open. Touch the keyboard icon next to the Memory Page's name to enter a new name.
Bump Button timings may also be edited using this method.
The Bump button associated with the fader may have its action configured as follows:
Momentary: The Memory is active only while the button is pressed.
Toggle: Press to recall the Memory. Press again to release the Memory.
Radio: When several buttons are configured as part of a Radio Group, only one
button and its Memory may be active at any time. Radio Groups may be named
and each Memory Page may have multiple Radio Groups.
Disabled: Disables the button. The Memory is still controlled by the fader.
Bump Button Timings:
Up/Down fade times may be set for the action of the Bump buttons, regardless of
their configured action. By default the buttons have a timing of zero.
Press the Done icon to record the Memory, or press the Cancel icon to begin again.
Cue
Cue saves the current stage look into a Playlist. The Playlist is shown on the left, and
details of the selected cue are shown on the right.
By default, two playlists are shown. To add further Playlists, to delete existing Playlists,
or to rename a Playlist, touch the More icon at the right end of the Playlist bar. The
Playlist Library will be shown.
To add a Playlist, touch the Add New icon. To rename or delete a Playlist, press the
Edit button to the right of the touchscreen. To delete, touch the Delete icon. A second
Delete icon will appear. Touch the second Delete icon to confirm. To rename the
Playlist, touch the Playlist's current name. An Edit Properties screen will appear. Touch
the keyboard icon next to the Playlist's name to enter a new name.
To record a Cue, touch the location labeled Add New Cue. The selected location will
have a red outline. Touch the keyboard icon next to Name to label the cue. A number
of timing options may also be set. If an existing cue is selected, when Done is touched,
options will be presented to update the cue, replace the cue, or to insert a new cue
either before or after the selected cue.
Fade: Sets a basic crossfade time. If no other timings are set, this timing will be used to
govern a light's change in Intensity, Color, Position and Shape attributes.
Delay: Sets a delay time between pressing GO and the start of the fade.
Down Fade: Sets a different fade time for all lights moving to a lower intensity. If no
value is set, the down time equals the Fade time.
Down Delay: Sets a delay time between pressing GO and the start of the Down Fade.
Allows you to create a 'split-crossfade' for situations where some lights must come up
before other lights go down.
17
Advertisement
Table of Contents
