Table of Contents
Advertisement
[1] PRODUCT OUTLINE
This inserter is an optional unit for the AR-620 series of digital complex
machines. With the inserter installed, blank sheets or printed sheets
can be inserted as covers (made of cardboard) or tabbed sheets with-
out being subject to the printing process (and without passing through
a fixing unit). When the inserter is combined with a finisher (optional)
and a punch unit (optional), printed sheets can proceed to the hole
punching or stapling process without being subject to the copying pro-
cess (or without passing through the main unit).
[2] SPECIFICATIONS
1. Basic specifications
A. Performance
Type of Installation Floorstanding
Delivery speed
Through mode
(Horizontal
transportation):
Straight mode:
Saddle mode
(Reverse):
Productivity
50 cpm (when A4 or letter-sized insert sheets
are continuously transported/saddle mode not
applicable)
Transport
Center reference through (when horizontally
reference
transported)
Loading capacity
100 sheets max. (80 g/m
Maximum loading height:
Maximum loadable sheets: 30 (127g/m
Factor 0.6 or less applied to above limitations
for special papers
Offline function
Provided
Manual operation
Equipped with keys and LEDs
section
Stapling
Possible
Saddle stitching
Possible
(With folding)
Punching
Possible
Paper jam
Paper feed/
handling
Transport unit
Horizontal
transport unit
B. Compatible paper types
Paper weight
60 – 256gm
should be less than 256µm)
Types
Normal paper, special paper (OHP films, colored
paper, punched paper, tabbed paper)
Special papers
OHP films: Saddle mode (reverse) not applicable
Punched paper: 2, 3, or 4 holes
2 holes (φ6.5): Hole pitch: 80mm
2 holes (φ8):
3 holes (φ8):
4 holes (φ6.5): Hole pitch:
4 holes (φ6.5): Hole pitch:
217mm min.
800mm/sec
216mm max.
1000mm/sec
217mm min.
800mm/sec
216mm max.
1000mm/sec
217mm min.
800mm/sec
216mm max.
1000mm/sec
2
or less)
12 mm (80g/m
greater)
2
greater)
Paper feeding cover open/
close
Transportation guide open/
close
2
(Normal paper, whose thickness
Hole pitch: 70mm
Hole pitch: 108mm+108mm
80mm+80mm+80mm
21mm+70mm+21mm
AR-CF2 PRODUCT OUTLINE 1 - 1
Paper sizes
Size detection
Paper sizes that
can be stapled
Paper sizes that
can be saddle
stitched
Paper sizes that
can be punched
C. Mechanical specifications
External
dimensions
Footprint
2
or
Weight
or
Item enclosed
2. Electrical specifications
Input voltage
Power consumption
3. Environmental conditions
Operating
conditions (normal
operation)
Transport/storage
environment
4. Compliance
Safety standard
Electromagnetic
Compliance
Ledger (LD), Legal (LG), Letter (LT), Letter R
(LTR), Foolscap, Executive R, Invoice R, 18K,
16K, 16K-R, Wide sheet
Width: 304.8mm max. (12 inches max.)
Length: 457.2mm max. (18 inches max.)
The 3 destinations below are user-definable
cm:
A3, B4, A4, A4R, B5, B5R, A5R
(Foolscap is manually specified on the
operation panel of main unit)
inch:
LD, LG, LT, LTR, Executive R, Invoice R
China: 8K, 16K, 16K-R
∗ Mixed loading is not possible. When offline, sta-
pling and punching are possible only for papers
that have the identical width (A3 and A4, B4 and
B5, LD and LT). Note that compatibility with the
finisher is not considered.
Compliant with the specifications both of the main
unit and the finisher.
Compliant with the specifications both of the main
unit and the saddle finisher.
Compliant with the specifications both of the main
unit and the punch unit.
Product
(W) 320 x (D) 580 x (H) 1060 mm
∗ Latch unit and tray unit
dimensions
excluded.
Packaged
(W) 1295 x (D) 680 x (H) 516 mm
dimensions
(W) 320 x (D) 580 mm
∗ Latch unit and tray unit
excluded.
Product weight
Approx. 23kg
Package weight
Approx. 32kg
Inserter: 1
Supplied from the main unit
DC+24V ± 10%
DC +5V ± 5%
DC+24V: 58.3W max.
DC +5V: 1.1W max.
Temperature
5 – 35°C
Humidity
20 – 85%RH (No condensing)
Temperature
–20 – 50°C
Humidity
10 – 90%RH (No condensing)
UL: 60950 the 3rd edition
C-UL: CAN/CSA-C22. 2 No.60950 the 3rd edition
CE: EN60950 ITS (German GS mark)
VCCI: Class B
FCC: Class B
CE: EN50081-1 EN55024
Advertisement
Table of Contents
