Table of Contents
Advertisement
Step 2: Positioning the
System
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A).
Place speakers as illustrated below.
Note
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• When cleaning, use a soft cloth such as a cleaning
cloth for glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
Tip
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see "Getting Optimal Surround Sound for a
Room" (page 71) and "Calibrating the Appropriate
Settings Automatically" (page 73).
14
GB
Step 3: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
C/X/x/c,
1
Turn on the TV.
2
Press [/1.
Note
• Make sure that the function is set to "DVD"
(page 25).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [
] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 16) and perform
again.
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
"/1
DISPLAY
Hide quick links:
Advertisement
Table of Contents
