Lexus LS460 Navi U User Manual page 12

188
AUDIO/VIDEO SYSTEM
D
Presetting a station
1. Tune in the desired station.
2. Touch one of the channel selector
touch−screen buttons (1 — 6) you want
and hold it until a beep is heard.
This sets the station to the button and the
frequency appears on the touch−screen
button.
Each radio mode can store up to 6 station-
s. To change the preset station to a differ-
ent one, follow the same procedure.
The preset station memory is cancelled
when the power source is interrupted by
battery disconnection or a blown fuse.
2007 LS460L/LS460 Navigation from Aug. '06 Prod. (OM50750U)
LS460_Navi_U (L/O 0609)
D
Selecting a station
Tune in the desired station using one of the
following methods.
Preset tuning: Touch the channel selec-
tor touch−screen button (1 — 6) or push
the " " or " " button of "CH/DISC" for
the station you want. The touch−screen
button is highlighted and the station fre-
quency appears on the screen.
Seek tuning: Push the "
ton of "SEEK/TRACK". The radio will be-
gin seeking up or down for a station of the
nearest frequency and will stop on recep-
tion. Each time you push the button, the
stations will be searched automatically
one after another.
To scan all the frequencies: Touch
"SCAN" on the screen or push the
"SCAN" button briefly. "SCAN" appears
on the screen. The radio will find the next
station and stay there for a few seconds,
and then scan again. To select a station,
touch "SCAN" or push the "SCAN" but-
ton again.
To scan the preset stations: Touch
"SCAN" on the screen or push the
"SCAN" button for longer than approxi-
mately a second. "P·SCAN" appears on
the screen. The radio will tune in the next
preset station, stay there for a few se-
conds, and then move to the next preset
station. To select a station, touch "SCAN"
or push the "SCAN" button again.
" or " " but-