10 Operating Instructions and Installation
10-2 Installing Stand Kit
1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold
sepa
rately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
2. Set up the left and right stands respectively.
3. Put the stand into the hole at the bottom of the monitor.
Insert screw into the hole indicated and tighten. (M4 × L15)
Make sure to use the semi stand only for adjusting the screen.
The company is not responsible for the damage caused by using them with other purpose.
10-8
Left stand
Make sure to install the stand with Caution
label folded backward.
Right stand