11 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the BE40TS LCD monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution
when handling these components.
11-1 Disassembly
Cautions: 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description
1. Remove 18 screws from the rear
cover and lift up the rear cover
2. Remove 17 screws from the shield and
lift up the shield cover and the FAN.
3. Remove 12 screws as showed the
picture.
11 Disassembly and Reassembly
Picture Description
FAN1
FAN2
Screw
Screw
FAN3
Screw
11-1