JVC UGZ-MG645 Manual Book page 61

Menus
DISPLAY SETTINGS
9
LANGUAGE
Sets the display language.
:
CLOCK ADJUST
Sets the time.
;
DATE DISPLAY STYLE
Sets the date and time display
format.
B
MONITOR BRIGHT
Sets the brightness of the LCD
monitor.
C
MONITOR BACKLIGHT
Enables you to adjust the brightness
of backlight on the monitor.
Y
BASIC SETTINGS
[
DEMO MODE
Introduces special features of
the camcorder when there is no
operation for about 3 minutes during
recording mode.
(
AUTO POWER OFF
If the camcorder is not operated for
5 minutes while the power is on,
it turns itself off automatically to
conserve power.
\
OPERATION SOUND
Turns on/off the operation sound.
Settings: [ ] = Factory-preset
Select [DISPLAY SETTINGS], then select sub-menus.
[ENGLISH]
See page 17.
See page 16.
DATE STYLE:
[month.day.year] / year.month.day / day.month.year
TIME:
24h / [12h]
Adjusts the brightness of the display by using the touch
sensor.
BRIGHTER : Brightens the backlight on the monitor
regardless of the surrounding conditions.
STANDARD : Select this when saving the battery life.
[AUTO] : The brightness will automatically be set
to [BRIGHTER] when using outdoors and to
[STANDARD] when using indoors (when using the
battery pack).
Select [BASIC SETTINGS], then select sub-menus.
OFF : Deactivates the function.
[ON] : Activates the function.
NOTE
•
The demonstration only works when the AC adapter is
connected, not with the battery pack.
•
If a microSD card is in the camcorder, demonstration will not
take place even if this mode is set to [ON].
OFF : Disables the function.
[ON] : Activates the function.
To turn the camcorder on again, close the LCD monitor
and open it again when using the battery pack. When
using the AC adapter, perform any operation such as
zooming.
OFF : Turns off the operation sound.
[ON] : The melody sounds when operations are performed.
61
EN