Installation - Dimplex DAC12AC User Manual

Installation

Before you use this unit please ensure it has been kept upright for at
least 2 hours.
1. The unit should be installed in a flat dry place. Leave at least 50cm space
around the unit (Fig. 1).
2. Fix the exhaust hose adapter to the exhaust terminal of the unit (Fig. 2).
3. Screw one end of the exhaust hose into the exhaust hose adapter and
screw the window exhaust adapter to the other end of the exhaust hose.
4. The window kit has been designed to fit most standard vertical (Fig. 3)
and horizontal (Fig. 4) windows. However it may be necessary for you to
modify some aspects of the installation procedures for certain types of windows. Once the
window kit is in place, simply snap the window exhaust adapter into the hole provided on the
window kit. You are now ready to use your portable air conditioner.
Fig. 2
5. Permanent installation (Fig. 5)
•
Fix the exhaust hose adapter to the exhaust terminal of the unit and screw in the exhaust
hose.
•
Make a round hole with the diameter more than 120mm, then input and fix the window kit
adaptor.
•
Fit the supplied round adapter on the air outlet duct then connect it with the Cover.
Incorrect mounting (Fig. 6)
The bend of the exhaust pipe is very important. Take care to
prevent any sharp bow or bend in the exhaust. The exhaust air
must flow freely otherwise the air conditioner may malfunction.
NOTE: The length of the exhaust duct is between 500mm to
1500mm. We suggest using the minimum length of exhaust duct
for maximum performance.
This length has been designed according to the
specifications of the air conditioner. Do not use an extension
or exchange with a different hose as that may lead to
malfunction.
Do not use the unit in the bathroom or other humid environments.
Fig. 3
Fig. 5
5
Fig. 1
Fig. 4
Fig. 6