Network Connection - Panasonic DMP-BD55 Operating Instructions Manual

G Connecting to DIGITAL AUDIO OUT terminal
You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL or OPTICAL terminal.
With COAXIAL ([BD55]) or OPTICAL
Back of the unit
Optical digital audio cable
Connecting AC mains lead
Back of the unit

Network connection

H With LAN
By connecting the unit to broadband Internet, you can use a disc that offers
BD-Live function. ( 16)
This connection also allows you to automatically check for the latest firmware
version. ( 13)
Internet
Straight LAN cable (not included)
Telecommunications equipment
(modem, etc.)
Coaxial cable
COAXIAL IN
OPTICAL IN
Cooling fan
AC mains lead
(included)
To a household mains socket
(AC 230 to 240 V, 50 Hz)
Back of the unit
Hub or broadband router
≥When your communication equipment (modem), etc. has no
broadband router functions: Connect a broadband router.
When your communication equipment (modem), etc. has broadband
router functions but there are no vacant ports: Connect a hub.
≥Use a router that supports 10BASE-T/100BASE-TX.
Amplifier/receiver with
NOTE
a built-in decoder or a
decoder-amplifier/
receiver combination
NOTE
TIPS
≥After connecting to the Internet, perform
necessary settings. (
≥Inserting any cable other than a LAN cable
NOTE
in the LAN terminal can damage the unit.
≥Use only shielded LAN cables when
connecting to peripheral devices.
TIPS
NECESSARY SETTINGS
≥"Digital Audio Output" : Depending
on the connected amplifier/receiver
( 27)
When connecting a television with
HDMI AV OUT terminal ( 6, A).
≥"HDMI Audio Output" : "Off" (
(Otherwise, the sound may not be
output with the desired audio.)
Connect only after all other
connections are complete.
Conserving power
This unit consumes a small amount of
power even when it is turned off (less
than 0.6 W). To save power when the
unit is not to be used for a long time,
unplug it from the household mains
socket.
12)
28)
RQT9245
9