Care And Maintenance - View-Master Interactive Vision Installing And Operating Instructions

CARE AND MAINTENANCE
Care and Maintenance
• Do not use any Power Adapter other than the AC Adapter
included with the View-Master® Interactive Vision
TYI
Television
System (VMIV).
• Always turn the Video Processor Power Switch OFF when not in
use.
• It
is not recommended that you unplug the Remote Control Cable
from the Electronic Controller Unit once it is connected. However,
if your Electronic Controller Unit needs cleaning, turn off the
Video Processor and unplug the Remote Control Cable. Then you
may wipe the Electronic Controller Unit with a damp cloth. (Do
not spray cleaners or water on the unit.) Then plug it back in.
• Do not disassemble or attempt to repair VMlV. Doing so will
automatically void all warranties.
• Periodically examine the VMlV components for potential hazards,
and be sure to repair or replace any potentially hazardous parts.
• Allow proper ventilation for the Video Processor while the system
is in use. Do not obstruct heat vents on the Video Processor by
placing objects (magazines, newspapers, etc.) on top of it.
• During operation, do not place the Video Processor
o~
any "soft"
surface (bed, sofa, pillow, etc.) that might block the air vents on
the bottom of the unit.
• Rewind all your videocassettes completely in order to keep them in
the best condition.
• Store VMIV Interactive Videocassettes i.n their protective sleeves
when not in use.
24