Operating The System; Starting Up; Starting And Stopping; Replaying An Interaction - View-Master Interactive Vision Installing And Operating Instructions

OPERATING THE SYSTEM
Starting U'p
1.
Slide the square switch to tum the
View- Master® Interactive Vision
™
Television System (VMIV) on.
2.
Tum the TV and VCR on. Tune the TV
to channel 3 or 4. to match the switch
settings on your VCR and VMIV.
3.
Insert the interactive videocassette into the VCR.
4.
Press "Play" on the VCR. (Note: In these operating instructions. all
videotape operations. such as playing. pausing. rewinding. and fast
forwarding. apply to controls on your VCR.)
5.
The first time you use any interactive videocassette. be sure to view the
instructions at the beginning.
Starting and Stopping
• Yellow stripes appear on the video from time to
time as indicators for good points to start or
restart the tape. The best place to start or stop
the tape is during the display of these yellow
stripes. You can start the tape from anywhere.
but if the yellow stripes are not visible at your
starting point. the interactive features of the tape
may not function immediately.
Replaying an Interaction
1.
Find the interaction you want to replay.
2.
Rewind the tape to the first set of yellow stripes before that interaction.
3.
Play the tape at normal speed.
Yellow stripes
appear at the
edges of your
TV screen
20