A Note On Stereo - View-Master Interactive Vision Installing And Operating Instructions

SETTING UP
A Note on Stereo
No matter what type of stereo configuration you have, you will
be able to use the View-Master® Interactive Vision
™
Television System (VMIV) with no problem.
• If your TV has MTS (multi-channel television sound)
capability, broadcast stereo will be transmitted to the TV
through the RF cable as normal.
• If your stereo or Hi-Fi TV receives its audio and video
signal from the VCR's AUDIO OUT and VIDEO OUT jacks,
then you can install the VMIV as diagrammed on page 17
for normal monaural operation. The VIDEO OUT and one of
the AUDIO OUT signals will be diverted to the VMN, and a
monaural (or MTS) RF signal will be transmitted to the TV.
• To maintain Hi-Fi or stereo capability,
you can purchase two additiona!,
inexpensive RCA V-connector cables
(illustrated at the right) which are
readily available in most consumer
electronics stores. Install them as
illustrated in the diagram on page 19.
18