Connections; Turning It On - scope LSU VL-7EX II User Manual

Connections

The white camera cable (aka "rope") connects the scope to
•
the cradle.
The black power cable connects the cradle to a power outlet.
•
The yellow-tipped video cable connects the cradle to your
•
display–whether you choose to use a TV, projector, active
board, or computer via digital converter.
Each cable has a differently shaped end, which means that unless you can fit a square peg in a
round hole, you can't get it wrong!

Turning It On

1. Once all the cords are connected and
you are ready to begin using the SOAR,
make sure the power switch is turned
on (it will glow red when it's on).
3. Turn on the television, projector, or other display device that you are using with the scope.
Depending on the display you are using, you might need to take steps to make sure the display
finds the proper input. You'll know it's working when you see a letter "A" on the screen. If you
have the "New" SOAR, the small, yellow letter will appear in the upper right hand corner. If you
have an "Old" SOAR, the small, white letter will appear in the lower right hand corner. For more
tips, refer to the Troubleshooting section.
New SOAR display
You are now ready to begin "scoping"!
Handheld Microscope Users Guide
2. Press the LIGHT button to turn on the
lights of the lens. Note: Skip this step if
you are using the "Old" SOAR.
Old SOAR display
5