L2 Scope; Parts And Assembly Of The L2; Turning The L2 On - scope LSU VL-7EX II User Manual

The L2 Scope connects to a TV or projector like the Scope-On-A-Rope, but is designed to work
with the same accessories as the ProScope (see next section). This section describes parts and
assembly of the L2, how to use lenses, and how to set it up in different ways using accessories.

Parts and Assembly of the L2

12
13
11

Turning the L2 On

1. Locate the black cord coming out of the
bottom of the scope. It has three
connectors at the end of it–for video
(yellow), audio (white), and power (red).
2. Connect the black power supply cord to
the red cable coming out of the scope,
and plug the other end into a power
outlet.
3. Connect the yellow-tipped video cable
coming out of the bottom of the scope to
your display–whether you choose to use
a TV, projector,
computer via digital converter.

L2 Scope

14
7
9
8
10
6
5
1
2
3
active board, or
Handheld Microscope Users Guide
1. L2 scope
2. Video cable
3. Power cable
4. Power supply
5. 50X lens
6. 1X lens
7. 30X lens
4
8. 200X lens
9. 100X lens
10. 400X lens
11. Stand
12. Lamp
13. Lamp shade
14. XYZ stage
The L2 comes with a
scope with a cord
attached to the bottom of
it, a separate power cord,
and one or more lenses.
L2 with cords connected
15