Samsung WD10F7S7SRP User Manual page 46

smart control
5. Once the phone app has been downloaded to your phone, you
are now ready to set up the washer Wi-Fi control.
6. You need to fi rst press the Power button to
activate the your machine. You can activate the
machine to any wash cycle.
7. Simultaneously hold down the Smart Control
+ Delay End buttons for 5 seconds. The
'Wi-Fi' indicator blinks for approximately 60 ~
90 seconds. After the indicator stops blinking,
proceed to the next step.
8. After you activate the machine, press the
Temp. + Start/Pause buttons simultaneously
for 5 seconds. Then the "AP" menu appears on
the LED screen.
46_ smart control
YUKON-WIFI-03073U-01_EN_130828.indd 46 YUKON-WIFI-03073U-01_EN_130828.indd 46 2013-08-28 2013-08-28 10:24:20 10:24:20