Advertisement
AND TURN IT ON
STEP 5
BITS YOU'LL NEED:
Switch on your TV.
Switch on the Set Top Box using the power switch on the BACK of the Set Top Box (A).
Using your TV Remote Control, find the HDMI input channel you used in Step 3
(or component/composite input if you used this). You can do this via the 'Source'
(or 'Input' or 'AV Select') button on your TV Remote Control.
You should see the Fetch TV logo on your screen when you've found the correct
input channel.
FOLLOW THE PROMPTS
STEP 6
AND YOU'RE SET
BITS YOU'LL NEED:
You will now be taken through the rest of the Optus TV setup on your TV screen.
The on-screen setup will take approximately 5–15 minutes depending on your
broadband speed
NOTE: Your TV screen will appear blank a number of times during the on-screen setup and
may remain blank for up to 2 minutes. Your Set Top Box will also reboot during the setup
process – this is normal behaviour. Please do not turn your Set Top Box off at any stage
during setup.
Insert the 2 x AA Batteries (D) into the included Set Top Box Remote Control (B).
Have your included Activation Letter (C) handy during the setup. You will need to
enter the Activation Code which is on this letter to activate your Set Top Box.
A.
AC 240V ~ 50Hz
(A)
B.
REMOTE CONTROL
D.
SET TOP BOX
YOUR TV
C.
2 x AA BATTERIES
ACTIVATION LETTER
YOUR TV
REMOTE
Advertisement
