Recording Mode Setting; Tape Length Setting - JVC LYT0261-001B Instructions Manual

14
EN
System
Select Switch
SP/EP Recording
Mode Button
Select Dial
Viewfinder
SP
Display
4
NEXT
M . W . B . AUTO
D . ZOOM ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T30
PICTURE FINE
SNAPSHOT FULL
4
RETURN
TAPE LENGTH
T20
T30
T40
EXIT
4
NEXT
M . W . B . AUTO
D . ZOOM ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T40
PICTURE FINE
SNAPSHOT FULL
4
RETURN
MENU Button
Power Switch
Tape length indicator
T30
Recording mode
indicator
Menu Screen
TAPE LENGTH
Setting Menu
GETTING STARTED

Recording Mode Setting

Set depending on your preference.
1
SET RECORDING MODE
First set the System Select Switch to "VIDEO", then
set the Power Switch to "AUTO" or "PRO.". Press SP/
EP for more than 1 second. "SP" (Standard Play)
provides higher picture and sound quality and is
better for dubbing, while "EP" (Extended Play) is
more economical, providing three times the record-
ing time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.

Tape Length Setting

Set the tape length according to the length of the tape
used.
1
ACCESS MENU SCREEN
First set the System Select Switch to "VIDEO", then
set the Power Switch to "PRO.". Press MENU.
2
SELECT FUNCTION
Rotate the Select Dial to move the highlight bar to
"TAPE LENGTH", then press it. The TAPE LENGTH
Setting Menu appears.
3
SET TAPE LENGTH
Rotate the Select Dial to move the highlight bar to the
correct setting. T20=20 minutes of recording time,
T30=30 minutes, and T40=40 minutes (in SP).
•If you decide you want to return the tape length to
the previous setting, rotate the Select Dial to move
the highlight bar to "EXIT".
4
CLOSE MENU SCREEN
Press the Select Dial. The Menu Screen reappears
with the highlight bar on "RETURN". Press the Select
Dial again to close the Menu Screen.
NOTE:
The tape remaining time (
viewfinder is correct only if the correct tape length has
been selected.
(cont.)
pg. 19) displayed in the