Picture Mode Setting - JVC LYT0261-001B Instructions Manual

24
EN
SNAPSHOT Button
System
Select
Switch
MENU Button
Select Dial
Display
4
NEXT
M . W . B . AUTO
D . ZOOM ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T30
PICTURE FINE
SNAPSHOT FULL
4
RETURN
PICTURE
FINE
STANDARD
EXIT
4
NEXT
M . W . B . AUTO
D . ZOOM ON
TELE MACRO OFF
DATE TIME
TAPE LENGTH T30
PICTURE STD
SNAPSHOT FULL
4
RETURN
Normal Screen
STD 12
Picture mode display
STD FINE
Power Switch
Menu Screen
PICTURE Menu
Menu Screen
Remaining number
of shots
60 59 1 0
(Blinking)
D.S.C. SHOOTING

Picture Mode Setting

FEATURE:
PURPOSE:
There are two image settings you can choose from
when storing in the camcorder's memory: FINE and
STANDARD. FINE allows you to shoot up to approx.
30 still images in a format based on JPEG (Joint
Photographic Experts Group). Since the quality of
image is better than "STANDARD", "FINE" is more
suitable for post-production on a PC. "STANDARD"
allows you to shoot up to approx. 60 still images in a
format based on JPEG (Joint Photographic Experts
Group). Since in this mode, twice as many still images
can be shot as in the "FINE" mode, select this mode
when you wish to shoot many still images.
OPERATION:
1) Turn the LENS COVER Open/Close Ring to open the
lens cover, and set the System Select Switch to
"D.S.C.". Set the Power Switch to "PRO.".
2) Press MENU. The Menu Screen appears.
If you wish the Picture Mode to return to the previous
setting, rotate the Select Dial to move the highlight
bar to "RETURN".
3) Rotate the Select Dial to move the highlight bar to
"PICTURE", and press it. The PICTURE Menu
appears.
Rotate the Select Dial to move the highlight bar to
"FINE" or "STANDARD", and press it. Selection is
complete.
4) The Menu Screen reappears with the highlight bar
on "RETURN". Press the Select Dial again to close
the Menu Screen.
(cont.)